GNEE Scb14 10kv Dry Type Resin Cast Power Transformer Step Down Transformer

‌‌Product Introduction

SCB14 10kV dry-type resin cast power transformer‌ is an energy-efficient dry-type transformer that is widely used in various occasions that require high efficiency and low loss. The following is a detailed introduction of the transformer:

Basic information and technical parameters
The SCB14 resin cast transformer is a three-phase low-voltage foil-wound transformer cast with epoxy resin. The "SCB14" in its model indicates that this is a transformer cast with epoxy resin and foil-type low-voltage coils. The number "1600" indicates that its rated capacity is 1600kVA, and "10" indicates that its rated voltage is 10kV. In addition, "NX2" is the energy efficiency mark, indicating that the transformer meets the secondary energy efficiency standard‌

Energy efficiency standards and application areas
The SCB14 series dry-type transformers meet the secondary energy efficiency standards in the "GB20052-2020 National Standard for Energy Efficiency Limits and Energy Efficiency Grades of Power Transformers". Compared with the three-level energy-efficient SCB12 transformer, the no-load loss of the SCB14 transformer is reduced by 15%, the load loss is reduced by 10%, and the total loss is reduced by 20%-25%, showing a significant energy-saving effect. ‌

This transformer is widely used in places with high fire protection requirements such as high-rise buildings, airports, stations, docks, power plants, substations, etc., and is particularly suitable for places where high-energy-consuming transformers need to be replaced, such as residential areas, chemical plants, hospitals, etc. ‌

Design and materials ​

SCB14 transformer adopts a new design method and uses a new grade of electrical steel strip to increase magnetic density and reduce no-load loss. The winding copper wire uses higher quality materials to further optimize the load loss. Its core is stacked with cold-rolled silicon steel sheets, which are annealed and softened before being dipped in paint. The insulation oil is made of epoxy resin with excellent arc erosion resistance and anti-aging performance ‌

Economy and maintenance cost

​Due to the high energy efficiency and low operating cost of the SCB14 resin-cast power transformer, it is considered to be one of the most cost-effective dry-type transformers. Compared with SCB12 transformer, SCB14 transformer can save a lot of electricity every year, thus reducing operating costs.

Hot Tags: gnee scb14 10kv dry type resin cast power transformer step down transformer, China gnee scb14 10kv dry type resin cast power transformer step down transformer manufacturers, suppliers, factory, Outdoor Pad Mounted Transformer, Amorphous core distribution transformers, Power Transformer In Substation, pole mounted current transformers, Three Phase Electrical Transformers, Outdoor Oil Immersed Current Transformer