11kv 500 KVA Three Phase Epoxy Cast Resin Dry Type Distribution Transformer Supplier
Have questions? GNEE sales representatives are available for live chat now
Send E-mail: sales@gneeelectric.com
Tel: +8615824687445
Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of 11kv 500 kva three phase epoxy cast resin dry type distribution transformer supplier in China. If you're going to buy customized 11kv 500 kva three phase epoxy cast resin dry type distribution transformer supplier made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.
11kV 500kVA three-phase epoxy cast resin dry-type transformer is a dry-type transformer that uses epoxy resin as the insulating material.
Insulating materials and manufacturing process: The high and low voltage windings are wound with copper strips (foils), and epoxy resin is poured and cured in a vacuum to form a high-strength fiberglass body structure. This structure gives the transformer excellent electrical performance and lightning impulse resistance
Electrical performance: The transformer has excellent electrical performance and low partial discharge value, which can effectively reduce the partial discharge of the insulation structure, thereby extending the service life of the transformer
Cooling method: Usually natural air cooling (AN) or forced air cooling (AF) is used, which has low noise and efficient cooling effect, and can improve the load capacity and service life of the transformer
Maintenance and monitoring: A temperature display controller can be installed to display and control the operating temperature of the transformer winding to ensure the normal operation of the transformer and extend its service life. In addition, it also has functions such as fault alarm, over-temperature alarm and over-temperature tripping to ensure safe operation.

| Model: | SCB11-500KVA/10KV/0.4KV |
| Rated power: | 500kVA |
| Rated voltage: | 10KV/0.4KV |
| Frequency: | 50Hz |
| Winding: | Double winding |
| Number of phases: | Three phases |
| Cooling method: | Natural air cooling (AN) and forced air cooling (AF) |
| Protection level: | IP20 |
| Usage environment: | Indoor, power distribution room |
| No-load loss: | 1044W |
| Load loss: | 4880W |
| No-load current: | 1.8% |
| Short-circuit impedance: | 4.0% |

Main components of dry-type transformers
Iron core
The iron core is the main body of the magnetic circuit of the dry-type transformer, which is divided into an iron core column and an iron yoke. The winding is set on the iron core column, and the function of the iron yoke is to close the magnetic circuit.
Winding
The winding is one of the key components in a small dry-type transformer. It transfers electrical energy from the primary side to the secondary side through electromagnetic induction.
High-voltage connecting rod
The high-voltage connecting rod is used to connect the wires on the high-voltage side to ensure that the current can be smoothly transmitted to the inside of the transformer.
Upper iron yoke
The upper iron yoke is a part of the iron core, located above the iron core column, which supports and fixes the winding to ensure that the winding will not loosen or shift during operation.

Hot Tags: 11kv 500 kva three phase epoxy cast resin dry type distribution transformer supplier, China 11kv 500 kva three phase epoxy cast resin dry type distribution transformer supplier manufacturers, suppliers, factory, 6 6KV Transformer, 11KV Dry Type Transformer, copper Transformer, indoor dry type transformer, 70kVA Resin Insulation Transformer, 75 kva dry type transformer
You Might Also Like
Send Inquiry




















