3-phase 50 Hz Dyn11 Insulated Resin Cast Dry Type Power Transformer
Have questions? GNEE sales representatives are available for live chat now
Send E-mail: sales@gneeelectric.com
Tel: +8615824687445
Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of 3-phase 50 hz dyn11 insulated resin cast dry type power transformer in China. If you're going to buy customized 3-phase 50 hz dyn11 insulated resin cast dry type power transformer made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.
Three-phase 50Hz Dyn11 insulated resin cast dry-type power transformer is a power transformer that uses resin insulation material and dry insulation, with high efficiency and safety performance. Compared with traditional oil-immersed transformers, it does not contain oil, which can effectively avoid safety problems such as oil leakage, and has a longer service life
Features of dry-type power transformers
High safety performance: It does not contain oil, avoiding safety problems such as oil leakage.
High efficiency: Compared with oil-immersed transformers, three-phase resin-insulated dry-type power transformers have higher efficiency.
Long life: It is not affected by oil leakage and has a longer service life.
Easy maintenance: Since it does not contain oil, there is no need for oil maintenance and replacement.
Small footprint: Compared with oil-immersed transformers, three-phase resin-insulated dry-type power transformers have a smaller footprint
| Rated capacity: |
50kVA, 80kVA, 100kVA, 125kVA, 200kVA, 250kVA, 315kVA, 400kVA, 500kVA, 630kVA, 800kVA, 1000kVA, 1250kVA, 1600kVA, 2000kVA, 2500kVA |
| Primary voltage: | 50kV |
| Insulation grade: | Class F |
| Insulation level: | Rated voltage 10kV (6kV), power frequency withstand voltage 35kV/5min (25kV/5min), lightning impulse voltage 75kV (60kV) |
| Connection group: | Yyn0 (Dyn11) or Dyn11 (Yyn0) |
| Cooling method: | AN/AF |
| No-load loss : | SCLB10-R-30/10 is 170W, SCLB10-R-50/10 is 240W, SCLB10-R-80/10 is 330W, etc. |
| Load loss: | SCLB10-R-30/10 is 530W, SCLB10-R-50/10 is 760W, SCLB10-R-80/10 is 1090W, etc. |
| No-load current: | SCLB10-R-30/10 is 6.1%, SCLB10-R-50/10 is 8.7%, SCLB10-R-80/10 is 7%, etc. |
| Impedance voltage: | SCLB10-R-30/10 is 1.0%, SCLB10-R-50/10 is 4%, SCLB10-R-80/10 is 7%, etc. |
Application scenarios of dry-type transformers
Three-phase 50Hz Dyn11 insulated resin cast dry-type power transformers are suitable for important or special environments such as high-rise buildings, commercial centers, airports, tunnels, chemical plants, nuclear power plants, and ships. It has the advantages of high mechanical strength, good heat dissipation performance, strong overload capacity, small partial discharge, low loss, low noise, maintenance-free, easy installation, good moisture-proof performance, etc. It can replace the oil-immersed transformer and be directly installed in the load center. It can operate at 120% rated load under forced air cooling conditions and can be put into operation without pre-drying after shutdown.
Hot Tags: 3-phase 50 hz dyn11 insulated resin cast dry type power transformer, China 3-phase 50 hz dyn11 insulated resin cast dry type power transformer manufacturers, suppliers, factory, encapsulated dry type transformer, Dry Type Distribution Transformers, 50KVA Power Transformer, outdoor dry type transformer, Cast Resin Transformer, Cast Resin Dry Type Power Transformer
You Might Also Like
Send Inquiry