630 KVA Dry Type Step-Up Transformer China Supplier

630 KVA Dry Type Step-Up Transformer China Supplier

The 630 KVA dry-type step-up transformer produced by GNEE is a power conversion device, which is mainly used to increase the input voltage to the required output voltage, and can meet the power needs of different equipment and places.
Send Inquiry
Chat Now

Have questions? GNEE sales representatives are available for live chat now

Send E-mail: sales@gneeelectric.com

Tel: +8615824687445

630 KVA Dry Type Step-Up Transformer Basic parameters:

Rated power: 630 KVA (kilowatts)
Voltage ratio: Common voltage ratios include 380V/1200V or 380V/1140V, which can increase the lower input voltage to a higher output voltage to meet different needs

Power phases: Three-phase, suitable for most three-phase electrical equipment

 

630 KVA Dry Type Step-Up Transformer Features and advantages:

Solve the problem of low voltage: During the construction of the water diversion tunnel, if the high-voltage grid voltage is low or the low-voltage line is too long, causing the equipment to fail to operate normally, the transformer can increase the voltage to a suitable range, allowing the equipment to start and work normally

Deal with too many equipment: When the number of electrical equipment used in the construction is too low, the transformer can increase the voltage to ensure that the equipment is normal. Normal operation ‌

‌Cost-effectiveness‌: Compared with the use of unit generators to generate electricity, it saves about 40-50% of the cost, and the purchase cost and maintenance cost are low

630 KVA Dry Type Step-Up Transformer Working principle‌:

‌Electromagnetic induction principle‌: Through the winding structure and electromagnetic interaction inside the transformer, the input voltage is increased to the required output voltage value. The ratio of the number of turns of the primary and secondary coils determines the voltage conversion ratio ‌

630 KVA Dry Type Step-Up Transformer
Rated capacity: 630 KVA 630 KVA
Rated voltage 10 kV
Low voltage 0.4 kV or 0.22 kV
Connection group number Dyn11 or D,yn11
Rated frequency 50 Hz
Number of phases three-phase
Short-circuit impedance ≤ 6.5%
Cooling method: dry air cooling (ONAN)
Loss level S11
Protection level: IP54
Three phase Dry Type transformer Application Diagram

Dry type transformer

Dry Transformers Factory

Dry transformer

Cast resin type transformer

cast resin Dry Transformers Product Processing

Dry type transformer types

Customer Visit

3

 

GNEE Teams

product-600-338

 

Why Choose GNEE Dry Type Transformer?

GNEE have 16 years of experience in international power projects and have helped many customers around the world complete power projects. For example, Canada, Mexico, Panama, Ecuador, Guatemala, Honduras, Chile, El Salvador, Australia, New Zealand, Spain, Belgium, Algeria, South Africa, Ethiopia, Myanmar, Kazakhstan, etc. GNEE also have very good after-sales installation service team abroad, so if you have transformer needs, you can contact us.

1

 

 

 

Hot Tags: 630 kva dry type step-up transformer china supplier, China 630 kva dry type step-up transformer china supplier manufacturers, suppliers, factory, 250 kva distribution transformer, Dry Type Secondary Substation Transformers, Three Phase Electrical Transformers, Single Phase Pole Mounted Oil Immersed Transformer, 25 kva distribution transformer, Three Phase Outdoor Oil Immersed Transformer

Send Inquiry