10kV-35kV Amorphous Alloy Transformer

10kV-35kV Amorphous Alloy Transformer

A transformer using amorphous alloy material as the iron core is called an amorphous alloy transformer.Amorphous alloy is a solid alloy formed by melting materials mainly composed of iron, boron, silicon, nickel, and carbon, cooling them in a liquid state, and shaping them into thin metal sheets in one go. The solid alloy has no lattice or grain boundaries, hence it is called amorphous alloy.
Send Inquiry
Chat Now

Have questions? GNEE sales representatives are available for live chat now

Send E-mail: sales@gneeelectric.com

Tel: +8615824687445

Product Introduction

The thickness of amorphous alloy strip is 0.02~0.03mm, which is about 1/10 of silicon steel sheet. Therefore, 10kv-35kv amorphous alloy transformers' eddy current loss is very small, and the no-load loss and no-load current are very low. The energy-saving effect is significant, the operating cost is low, and the comprehensive benefits are good.
Based on the selection and use of the distribution power transformer, which are similar to conventional silicon steel sheet transformers, they do not cause any inconvenience and do not require additional training for operators. The oil filled transformers are widely used in urban areas, rural power grids, wind power industry, solar energy industry, and national key projects.

Technical Specification

application

Power Transformer, Oil-Immersed Transformer

Phase

Three

Coil Structure

TOROIDAL

Coil Number

AUTOTRANSFORMER

Place of Origin

Henan, China

Material

Copper

Frequency

50Hz, 60Hz

Winding Material

Copper

Model Number

S11-M

Input Voltage

Other, 10kV, 69kV, 110kV, 132kV, 220kV, 115kV, 22KV, 35kV

Output Voltage

440V, 480V, 11kV, Other

Certification

UL CE IEC ISO

High Voltage

35- 38.5 kv,10kv,20kv as customized

Tapping Range

±2X2.5%

Low Voltage

0.4kv as customized

Rated Capacity

500kVA~240MVA as customized

Connection

Dynll or Yyno

   

10kV-35kV amorphous alloy transformer10kV-35kV Amorphous Alloy Transformer

Main features:

1. Low loss: The iron core is made of high permeability amorphous alloy material and has a three-phase five column iron core structure. The no-load loss is reduced by more than 60% compared to products made of silicon steel sheets.

2. Low noise: The product's noise level is 3-5 decibels lower than the national standard.

3. High mechanical strength: The high and low voltage coils adopt a rectangular structure, the low voltage coils are wound with copper foil, and the high and low voltage coils are wound together using a horizontal assembly process to ensure that the amorphous iron core is not damaged during assembly. The insulation of the upper and lower iron yokes of the body adopts a connected structure. High mechanical strength and strong short-circuit resistance.

4. Maintenance free: The amorphous alloy transformer adopts a maintenance free structure and process, and there is no need to inspect the cover during on-site installation. All accessories are pre installed in the factory. Product maintenance is simple and convenient.

 

Hot Tags: 10kv-35kv amorphous alloy transformer, China 10kv-35kv amorphous alloy transformer manufacturers, suppliers, factory, High Voltage Oil Immersed Power Transformer, Oil Immersed Power Transformer, Oil Immersed Transformers, Single Phase Oil Immersed Distribution Transformer, Single Phase Oil Immersed Transformer, Three Phase Oil Immersed Power Transformer

Send Inquiry