Amorphous Alloy Oil-immersed Transformer
Have questions? GNEE sales representatives are available for live chat now
Send E-mail: sales@gneeelectric.com
Tel: +8615824687445
Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of amorphous alloy oil-immersed transformer in China. If you're going to buy customized amorphous alloy oil-immersed transformer made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.
Amorphous oil-immersed transformer has widely replaced the silicon steel core transformer in outdoor power distribution systems. It is energy saving and environmental friendly. Amorphous alloy transformers commonly adopt a sealed structure. Therefore, the insulating oil and dielectric cannot cause air pollution and can run in a damp environment.In this case, it is the ideal equipment for urban and rural general distribution network. It is especially suitable for places of low power and load fluctuations, and areas where routine maintenance is difficult to be implemented.
Technology Parameter of SH15-M Series
|
Rated capacity (kVA) |
Voltage and tapping range |
Symbol of connecting group |
No-load losses (W) |
Load losses (W) |
No-load current (%) |
Impedance of short circuit (%) |
||
|
HV(KV) |
Tapping range (%) |
LV(kV) |
||||||
|
30 |
6 6.3 10 10.5 11 |
±5 ±2x2.5 |
0.4 |
Dyn11 |
33 |
630 |
1.7 |
4 |
|
50 |
43 |
910 |
1.3 |
|||||
|
63 |
50 |
1090 |
1.2 |
|||||
|
80 |
60 |
1310 |
1.1 |
|||||
|
100 |
75 |
1580 |
1 |
|||||
|
125 |
85 |
1890 |
0.9 |
|||||
|
160 |
100 |
2310 |
0.7 |
|||||
|
200 |
120 |
2730 |
0.7 |
|||||
|
250 |
140 |
3200 |
0.7 |
|||||
|
315 |
170 |
3830 |
0.5 |
|||||
|
400 |
200 |
4520 |
0.5 |
|||||
|
500 |
240 |
5410 |
0.5 |
|||||
|
630 |
320 |
6200 |
0.3 |
4.5 |
||||
|
800 |
380 |
7500 |
0.3 |
|||||
|
1000 |
450 |
10300 |
0.3 |
|||||
|
1250 |
530 |
12000 |
0.2 |
|||||
|
1600 |
630 |
14500 |
0.2 |
|||||
|
2000 |
750 |
17400 |
0.2 |
5 |
||||
|
2500 |
900 |
20200 |
0.2 |
|||||

amorphous alloy oil immersed transformer Performance characteristics
1. Save electricity: no-load loss is about 80% lower than that of the S9 series.
2. Reliable: strong short-circuit resistance.
3. Protect the environment: low noise, can reduce carbon emissions.
amorphous alloy transformer Structural characteristics
1. The core adopts a three-phase five-column type, and the high-voltage winding adopts a D-type connection method, which eliminates the third magnetic flux and third harmonic potential, reduces the eddy current loss and temperature caused by leakage, and reduces the steepness of the impulse voltage.
2. The coil is rectangular and is wound with a wire tensioning device. The forming, pressing and other process measures are adopted to make the coil size meet the design requirements. The high-voltage coil is wound outside the low-voltage coil, which improves the coil strength and short-circuit resistance.
3. There is no oil storage tank and desiccant on the oil tank. The transformer oil does not come into contact with the air, and the expansion of the oil is compensated by the elasticity of the corrugated plate, which can be exempted from maintenance and increase the service life.
export case

Packaging&Shipping

Hot Tags: amorphous alloy oil-immersed transformer, China amorphous alloy oil-immersed transformer manufacturers, suppliers, factory, utility transformer, transformer for high intensity discharge lighting systems, transformer for industrial lighting, transformer for lighting brackets, electrical transformer, transformer for lighting covers
You Might Also Like
Send Inquiry




















