Amorphous Alloy Power Transormer

Amorphous Alloy Power Transormer

Amorphous alloy power transformer is a kind of energy-saving transformer, compared with ordinary transformers, amorphous alloy power transformer has the advantages of low no-load loss, low cost, high efficiency, convenient transportation and simple installation.
Send Inquiry
Chat Now

Have questions? GNEE sales representatives are available for live chat now

Send E-mail: sales@gneeelectric.com

Tel: +8615824687445

Amorphous alloy transformer is a kind of power transformer with low loss and high energy efficiency. This kind of transformer uses iron-based amorphous metal as the iron cores, because the material does not have a long-range ordered structure, its magnetization and demagnetization are easier than general magnetic materials. Therefore, the iron loss (that is, no-load loss) of the amorphous alloy power transformer is 70-80% lower than that of the traditional transformer that generally uses silicon steels as the iron cores. Amorphous alloy is a new type of strip, amorphous alloy material does not exist crystal structure, magnetizing power is small, high resistivity, so eddy current loss is small, using this material as the cores can produce a new energy-saving amorphous alloy transformer, is the ideal product for the replacement of distribution network.

Technical Parameter of S(B)H15-M Series Hermetical Amorphous Alloy Power Transformer

Rated capacity(kVA) Voltage and tapping range Connection Group Symbol No-load Loss(W) Load Loss (W)75℃ No-load current (%) Short-circuit impedance(%)
High Voltage (KV) Tapping ranges of High Voltage Low Voltage (KV)
30 66.31010.511 ±5% ±2×2.5% 0.4 Dyn11( or ) Yyn0 130 630/600 2.3 4.0
50 170 910/870 2.0
63 200 1090/1040 1.9
80 250 1310/1250 1.9
100 290 1580/1500 1.8
125 340 1890/1800 1.7
160 400 2310/2200 1.6
200 480 2730/2600 1.5
250 560 3200/3050 1.4
315 670 3830/3560 1.4
400 800 4520/4300 1.3
500 960 5410/5150 1.2
630 1200 6200 1.1 4.5
800 1400 7500 1.0
1000 1700 10300 1.0
1250 1950 12000 0.9
The structural requirements for amorphous power transformer are as follows:

1, The structure should be safe and reliable, easy to install, easy to maintain, and should be able to withstand the mechanical, electrical and thermal stress in the standard material composition.
2, Winding material: high voltage winding is wound with copper wire or copper foil, low voltage winding is wound with copper foil.
3, Iron core: the use of soft magnetic characteristics of amorphous alloy strip.
4, Core structure: three-phase three columns or three-phase five columns.
5, The cabinet should use strong Angle steel as support.
6. All non-current carrying parts such as the shell and support frame should be connected together and grounded through the ground bus.
7, High and low pressure inlet and outlet line:
(1) High voltage cable into the line, the protection shell is required to be equipped with cable support; (2) The low voltage side of the transformer adopts the plug type dense busbar slot.

GNEE power transformer factory

Amorphous core transformer

amorphous alloy power transformer application case

 Amorphous steel core

Packaging&Shipping

Amorphous steel core transformer

Amorphous steel transformer

Hot Tags: amorphous alloy power transormer, China amorphous alloy power transormer manufacturers, suppliers, factory, Dry Type Distribution Transformers, outdoor dry type transformer, Amorphous Alloy Distribution Transformer, Single Phase Pad Mounted Power Transformer, 500 Kva 3 Phase Pad Mounted Transformer, Single Phase Dry Type Transformer

Send Inquiry