Amorphous Alloy Resin Cast Dry-Type Transformer

Amorphous alloy dry type transformer is an advanced ultra-rapid cooling technology to spray liquid concubines such as iron, drill, boron, silicon onto a very high speed chassis and sharply cool down, forming a thin band of 0.02mm-0.04mm. It has excellent soft female energy, corrosion resistance, wear resistance and high resistivity characteristics. The comparison between amorphous alloy core and cold rolled grain to silicon steel wafer has the following advantages:

1. Amorphous alloy material does not exist crystal structure, is an isotropic soft material with small magnetic structure.

2. There is no Jing defect that hinders the movement of the domain wall, and its microhysteresis loss is smaller than that of silicon steel sheet.

Technical Parameter of Amorphous Alloy Resin Cast Dry-Type Transformer

SCBH15 series amorphous alloy dry transformers has the advantages of low no-load loss, oil-free, flame retardant self-extinguishing, moisture resistance and maintenance-free. All places where dry transformers are now suitable for amorphous alloy transformers (including airports, stations, urban subways, high-rise buildings and power plants, etc.), especially in flammable, explosive and power shortage places. The specific characteristics are:

1. Low consumption and energy saving: soft magnetic conductive materials with isotropic properties are used, with low magnetization power, high resistivity and low eddy current loss. The no-load loss and no-load current of the iron core made of amorphous alloy material are very low, with only 1 / 3 of the silicon steel sheets. The no-load loss of the transformer is 75% lower than the GB / T1022 overlook value. Can greatly reduce the operation of the competition, the energy-saving effect is significant.

2. Strong anti-corruption ability: the amorphous alloy cores is fully packaged by resin and high-temperature resistant silica gel to effectively prevent rust and amorphous alloy fragments from falling off, so as to effectively protect the cores and coils.

3. Low noise: in order to reduce the operating noise of the product, reasonable working magnetic density is selected in the product design, the cores and coils structure are improved, and special noise reduction materials are adopted, etc. The product noise is much lower than that of B / T10Q8.

Hot Tags: amorphous alloy resin cast dry-type transformer, China amorphous alloy resin cast dry-type transformer manufacturers, suppliers, factory, high frequency power transformer, Amorphous Alloy Transformers, Amorphous Core Type Transformer, compact substation, 75kVA Oil Immersed Distribution Transformers, power transformer station