Scb14 10kv Dry Type Cast Resin Power Transformer

Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of scb14 10kv dry type cast resin power transformer in China. If you're going to buy customized scb14 10kv dry type cast resin power transformer made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.

Product Introduction
SCB14 10kV dry-type resin cast power transformer is a high-efficiency and energy-saving dry-type transformer that adopts epoxy resin casting technology and has the characteristics of low loss, energy saving, economical operation and maintenance-free. The transformer complies with the secondary energy consumption standard in the "GB20052-2020 National Standard for Energy Efficiency Limit Values ​​and Energy Efficiency Grades of Power Transformers" and is suitable for various occasions requiring high efficiency and energy saving.

Dry-type resin cast power transformer technical parameters and performance characteristics

Energy efficiency standard: SCB14 transformer meets the second-level energy efficiency standard. Compared with the third-level energy efficiency SCB12 transformer, the no-load loss is reduced by 15% and the load loss is reduced by 10%

Loss characteristics: The total loss of SCB14 transformer is 20%-25% lower than that of SCB12 transformer, showing a significant energy-saving effect

Application scenarios: Widely used in high-rise buildings, airports, stations, docks, power plants, substations and other places with high fire protection requirements

Models and specifications
The model of SCB14 transformer is usually expressed in the form of "SCB14-capacity/voltage", for example, "SCB14-1000/10" means a transformer with a rated capacity of 1000kVA and a rated voltage of 10kV. Common specifications include 80kVA, 160kVA, 250kVA, 315kVA, 400kVA, 500kVA, 630kVA, 800kVA, 1000kVA, 1250kVA, 1600kVA, 2000kVA, 2500kVA, etc.

Market positioning and user evaluation
SCB14 transformer has been widely recognized in the market for its high efficiency, energy saving, low noise and convenient maintenance. It has good high temperature resistance and is suitable for various harsh environments. It is safe and reliable, with overload capacity and short circuit resistance to ensure long-term stable operation.

In addition, the design and material optimization of SCB14 transformer further reduce no-load and load losses and improve the economic efficiency of operation.

Structural forms of dry-type transformers
1. Open type: This is the most common structure, with the body directly exposed to the air, which is particularly suitable for dry and clean indoor environments. At a room temperature of 20 degrees, the relative humidity should be controlled within 85%. This structure usually uses air self-cooling or air cooling to dissipate heat.

2. Closed type: The body is enclosed in the outer shell and is not in direct contact with the outside air. This structure is mainly used in special environments such as mines and is an explosion-proof transformer.

3. Casting type: Its main insulation is cast with epoxy resin or other resins. It has a simple structure and compact size, which is very suitable for small-capacity transformers.

Hot Tags: scb14 10kv dry type cast resin power transformer, China scb14 10kv dry type cast resin power transformer manufacturers, suppliers, factory, Dry Type Transformer, 75 kva dry type transformer, 70kVA Resin Insulation Transformer, single phase dry type transformers, Cast Resin Dry Type Power Transformer, three phase dry type transformers