S11-M-30 10kv Fully Sealed Distribution Oil-Immersed Transformer
Have questions? GNEE sales representatives are available for live chat now
Send E-mail: sales@gneeelectric.com
Tel: +8615824687445
Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of s11-m-30 10kv fully sealed distribution oil-immersed transformer in China. If you're going to buy customized s11-m-30 10kv fully sealed distribution oil-immersed transformer made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.
Product Introduction
S11-M-30 10kV fully sealed distribution oil-immersed transformer is a low-loss, low-noise power equipment, widely used in various power supply scenarios. The following is a detailed introduction to the transformer:

| Rated capacity: | 30kVA |
| Rated voltage: | 10kV |
| Secondary voltage: | 0.4kV |
| No-load loss: | 100W |
| Load loss: | 630W |
| Short-circuit impedance: | 4.0% |
| No-load current: | 2.3% |
| Number of phases: | three-phase |
| Frequency: | 50Hz |
| Cooling method: | oil-immersed self-cooling |
| Protection method: | gas relay |
| Usage environment: | outdoor, indoor power distribution |
Basic parameters and performance characteristics of 10kV fully sealed distribution oil-immersed transformer
The iron core adopts a laminated structure, which is made of imported high-quality cold-rolled silicon steel sheets, effectively reducing no-load loss and no-load current
The coil adopts a low axial short-circuit force structure, which greatly reduces the axial short-circuit force of the transformer and improves the transformer's ability to withstand short circuits
The magnetic flux density is low, which further reduces the no-load loss, while ensuring that the core magnetic flux is not saturated and reducing the third harmonic
Fully sealed structure, extended service life, maintenance-free
Oil-immersed transformerAdvantages and application scenarios
Long service life, It can often be used for 5-10 years, or even longer.
Easy to install and maintain, most oil-immersed transformers have shell protection devices, and no special equipment is required to repair or replace their sealing components.

Applicable to a variety of power types, suitable for AC and DC power supply systems.
Low noise design, the measured noise value is lower than the standard.
Structural characteristics and technical parameters of distribution oil-immersed transformers.
High reliability support structure, to ensure reliable compression of the upper and lower parts of the coil and enhance the stability of the transformer.
Fully sealed design, the oil tank adopts corrugated sheets, which have breathing function, compensate for the change in oil volume caused by temperature changes, and no oil storage cabinet is required.
Strong anti-rust ability, the bolts and nuts on the cover surface are made of 304 stainless steel to enhance anti-rust ability.
The sealing rubber ring is made of high-quality materials to extend the service life.

Hot Tags: s11-m-30 10kv fully sealed distribution oil-immersed transformer, China s11-m-30 10kv fully sealed distribution oil-immersed transformer manufacturers, suppliers, factory, 2500kVA Oil Transformer, transformer corrosion protection, Single Phase Oil Immersed Power Transformer, 2000kVA Oil Filled Transformer, High Voltage Oil Immersed Power Transformer, transformer energy efficiency
You Might Also Like
Send Inquiry




















