167 KVA Single Phase Pole Mounted Transformer

Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of 167 kva single phase pole mounted transformer in China. If you're going to buy customized 167 kva single phase pole mounted transformer made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.

GNEE Electric has a full range of 167 kVA single phase pole-mounted transformers, fully compliant with IEEE, ANIS, CSA and DOE Std. The high voltage offerings span from 2.4 kV to 34.5 kV, accompanied by low voltage options including 277/480Y, 480/240, 480, 347, and 600 V configurations. Notably, our selection features the distinctive dual high voltage series. Benefit from our ready-to-ship inventory of 167 kVA pole-mounted transformers, guaranteeing swift delivery.

differences Between CSP transformers and conventional transformers in several important ways

1. Efficiency
CSP transformers can achieve efficiencies of up to 99%, while conventional transformers typically reach around 95%. This higher efficiency translates to reduced energy losses.
2. Size and Weight
CSP transformers are significantly smaller and lighter than conventional transformers, making them easier to install and integrate into various environments.
3. Power Density
CSP transformers exhibit a higher power density, enabling them to handle greater power levels within a more compact form factor. This characteristic is advantageous for space-constrained applications.
4. Response Time
CSP transformers respond much more quickly to load changes compared to conventional transformers. This rapid response makes them ideal for applications with fluctuating loads.
5. Flexibility
CSP transformers offer enhanced flexibility in input and output voltage ranges, allowing for a wider range of applications in different electrical systems.
6. Reliability
CSP transformers improve reliability and reduce the chances of failure and downtime compared to conventional models. This leads to more consistent performance and less maintenance.
7. Cost
CSP transformers can be more cost-effective in the long run due to their efficiency and reduced maintenance needs, despite potentially higher initial costs.
Conclusion
In summary, CSP transformers provide several advantages over conventional transformers, including higher efficiency, reduced size and weight, greater power density, faster response times, increased flexibility, and improved reliability. These benefits make CSP transformers a valuable choice in modern electrical applications.

This type of transformers are CSP type, which can protect itself from thunder and lighting, short circuit and protect the transiting and distribution line from current failure because of self-malfunction.
Except from some similarities such as cylinder tank, hooks, lifting lugs, grounding devices, nameplates, core and winding with the conventional type. This type of transformers have characteristics and devices as follows:
1) One or two high voltage bushings are on the cover with fuse.
2) One or two arresters are installed on the wall of the tank, whose top end is near to the high voltage bushing, and connected to the bushing by a copper strip. One secondary breaker switch is above the winding inside the tank, and here are operating handle,overload reset and signal light.
3) Low voltage bushing is educed from the wall of the tank, grounding device is fixed to position X2. One end of the single
bushing leads out through the high voltage bushing, the other end is ground connection.
4) All units are built in accordance with IEC60076, ANSI/IEEEC57.12.20, CSA C2.1-06,CSA C2.2-06 and etc.

[Csp Type structure]

[conventional Type structure ]

1.167 kVA 12.47 kV Pole Mounted Transformer

The 167-12.47/0.277-0.48Y is a 167 kVA overhead pole-mounted transformer manufactured by GNEE Transformer.

It falls within the category of distribution transformers and finds extensive usage across industries, village power distribution systems, and public utilities.

The design of transformers of this type is optimized for overhead pole mounting.

167 kVA 12.47 kV Pole Mounted Transformer Features

• Capacity: 167 kVA Primary Voltage: 12.47 kV delta
• Secondary Voltage: 277/480Y V (single phase)
• High Voltage: Equipped with two porcelain bushings
• Low Voltage: Features two spade bushings with a 4-hole terminal arrangement
• Winding: Aluminum winding
• Cooling System: The transformer incorporates a self-cooling mechanism(ONAN).
• Insulation Fluid: The preferred insulating fluid is mineral oil, which the customer requires.

2.167 kVA 24.94 kV Transformer Single Phase Pole Mounted Step Down Outdoor Transfomer

a.The 167kVA 24.94 kV pole-mounted transformer specification is below:

B.167 kVA Transformer Test Report

Hot Tags: 167 kva single phase pole mounted transformer, China 167 kva single phase pole mounted transformer manufacturers, suppliers, factory, 11kv Three Phase Pole Mounted Distribution Transformer, electrical transformer for pole mounted electricity transmission, pole mounted step up distribution transformer, electrical power supply transformer, pole mounted step down distribution transformer, three phase electrical power transformer on pole