10KV Amorphous Alloy Resin Cast Dry-Type Transformer

Henan GNEE Electric Co., Ltd. is one of the most reliable manufacturers and suppliers of 10kv amorphous alloy resin cast dry-type transformer in China. If you're going to buy customized 10kv amorphous alloy resin cast dry-type transformer made in China, welcome to get quotation from our factory. Quality products and reasonable price are available.

The iron core of amorphous alloy transformers is made of amorphous alloy. Amorphous alloy materials contains metal atoms in a disordered amorphous state whose loss is lower than that of silicon steel core, thus having the effect of high efficiency and energy saving. The area enclosed by the hysteresis loop of the amorphous alloy is much smaller than that of the cold rolled silicon steel sheet, so the hysteresis loss of the amorphous alloy is much smaller than that of the cold rolled silicon steel sheet, besides, its core loss is very low, even 70% lower than that of conventional silicon steel sheet. Due to low loss, amorphous alloy transformers generate less heat and lower temperature rise, and can be operated in a stable state, which have become an ideal transformer of low-loss and energy-saving.

Amorphous alloy Resin Cast dry type transformer Features：

1, Amorphous alloy is a new type of strip material, amorphous alloy material does not exist crystal structure, magnetization power is small, high resistivity, so the eddy current loss is small, with this material as the core can produce a new type of energy-saving transformer, is the ideal product for the renewal of distribution network.

2, Strong corrosion resistance: amorphous alloy core is fully sealed by resin and high temperature resistant silica gel pad to effectively prevent corrosion and amorphous alloy fragments falling off, so as to effectively protect the core and coil.

3, Low noise: in order to reduce the noise of the product operation, select reasonable flux density in the product design, improve the structure of the core and coil in the product processing, the use of special noise reduction materials, amorphous alloy dry transformer noise is far lower than the gb JB/T10088 requirements.

4, Short circuit resistance: the product adopts three-phase five-column and three-phase three-column structure, the iron core is protected by frame structure, and the structure is tight and reasonable. The high pressure coil is rectangular and segmented cylindric, made of polyurethane enameled wire and double glass fiber wrapped flat wire. The whole coil is poured into one body by epoxy resin vacuum pressure, which can completely eliminate bubbles in the coil. Ensure stable insulation performance and small partial discharge. The low voltage coil is divided into wire wound and foil structure to increase the transformer's ability to withstand short circuit.

5, low temperature rise, long service life: product temperature rise is low, heat dissipation ability is strong, in forced air cooling conditions can be 130% of the rated load operation. Optional temperature control and protection system with perfect performance can provide reliable guarantee for transformer safe operation.

Hot Tags: 10kv amorphous alloy resin cast dry-type transformer, China 10kv amorphous alloy resin cast dry-type transformer manufacturers, suppliers, factory, transformer for battery chargers, Amorphous Alloy Steel Transformers, transformer for lighting stands, Amorphous Steel Transformers, quality transformer, transformer for led lighting systems