What Is The Working Principle Of A Power Transformer?
Apr 08, 2024
Leave a message
1. The power transformer is a special transformer in which the output and input share a set of coils. The voltage step-up and step-down are realized with different taps. The voltage of the taps of the parts with fewer common coils will decrease, and the voltage of the taps of parts with more common coils will increase.
2. In fact, the principle is the same as that of an ordinary transformer, except that its primary coil is its secondary coil. In a general transformer, the primary coil on the left uses electromagnetic induction to generate voltage in the secondary coil on the right. The autotransformer is influenced by itself.
3. An autotransformer is a transformer with only one winding. When used as a step-down transformer, a part of the turns is extracted from the winding as the secondary winding; when used as a step-up transformer, the external voltage is only applied to one part of the winding. On the line. Usually the part of the winding that belongs to both primary and secondary is called the common winding, and the rest of the autotransformer is called the series winding. Compared with ordinary transformers of the same capacity, autotransformers are not only smaller in size, but also more efficient. The larger the capacity, the higher the voltage. This advantage becomes more prominent. Therefore, with the development of power systems, the increase of voltage levels and the increase of transmission capacity, auto-coupling transformers have been widely used due to their large capacity, low loss and low cost.
Send Inquiry

















