News

Advantage: 1. Transformer oil has good insulation performance and good thermal conductivity. At the same time, transformer oil is cheap. 2. It can ...

Load properties: 1) When there are a large number of primary or secondary loads, it is recommended to install two or more transformers. When any on...

a. Except for small-capacity copper wires, the low-voltage windings of oil-immersed transformers generally adopt a cylindrical structure with coppe...

Transformer oil is a petroleum-based liquid that has the potential to burn and has disadvantages in terms of environmental protection. However, due...

1. Most dry-type transformers now use H-class insulation materials, so generally the temperature of dry-type transformers should be below 180°C...

1. Shake measurement of insulation resistance must be carried out by two people. 2. It is strictly forbidden to touch the transformer before chargi...

1. Put in the spare transformer, disconnect the circuit breaker on the low-voltage side of the transformer for maintenance, remove the operating fu...

Dry-type transformers are mainly composed of iron cores made of silicon steel sheets and coils cast by epoxy resin. Insulating cylinders are placed...

Oil-type transformers and dry-type transformers are two common types of transformers. Their main differences are as follows: 1. Insulating medium: ...

The temperature range of dry-type transformer is: below 180℃. Generally speaking, the allowable temperature of a dry-type transformer is related to...

a) When the transformer and the low-voltage distribution cabinet are installed in parallel, the protection grade of the shell is not lower than IP3...

1. Is there any abnormal sound or vibration? 2. Whether there is any discoloration caused by local overheating, harmful gas corrosion, etc. that ma...